Logo Allmyblog
Logo Allmyblog
Lien de l'article    


Contacter l'auteur de ce blog

- pcb standard How To Clean Chairlifts
- pcb cutter and Source Custom Electronics or Embedded Systems Design from A Reliable Company for Best Quality
- cheap pcb for Guide To PCB And PCB Swap
- pcb fast - B.tech|M.tech Major|Minor Projects|Thesis|Dissertation
- pcb making to The Important Phases of Customizing Electronic Design

<< Décembre >>

Ajouter allinnovaecig à vos favoris
 pcb standard How To Clean Chairlifts Alerter l'administrateur Recommander à un ami Lien de l'article 

How To Clean Chairlifts Stairlifts can be dust magnets what is the best http://chinapcb.blogcu.com/pcb-manufacturer-uk-and-application-of-membrane-keypad-in-indust/20299798 method and products to use to clean your stairlift. Cleaning your stair lift should be a simple straight forward job. A quick dust down twice a week with a cloth duster or feather duster should be more than adequate.

Avoid using water or cleaning solvents at all costs. For straight stairlifts with aluminium tracks/rails can be wiped over with a damp cloth (Damp Not Wet) Then buff dry with a clean cloth.

The seat chair/carriage can be cleaned using house polish! Always spray the polish onto the cleaning cloth then rub and buff to a shine. (Never spray the polish directly onto the chair/carriage)

Spraying house polish directly onto the carriage could cause damage to components and circuit boards. If too much polish is applied it can find its way (Drip) through air vents etc. And cause S/C Short Circuits or corrode delicate components on the PCB printed circuit board.

Curved stairlift rails/tracks should never be cleaned with any type of solvents. Avoid house polish and DWD (Engineering oils) like the plague. Curved stairlifts use a system where the speed of the stairlift is monitored using an RMU! A roller sits on the rail and as your stairlift moves this roller rolls along the rail sending pulse information to the operating system.

Applying cleaning solvents to the curved rail could cause the roller to http://pcbonline.blogieren.com/Erstes-Blog-b1/pcb-electronics-How-PCBs-Damage-the-Creating-Brain-b1-p289.htm lose friction and skid, this action causes the stair lift to receive incorrect pulses and the stair lift will stop/shutdown. Typical symptoms intermittent stop starting! The stairlift will travel a few inches then stop. This symptom could also be caused through flat batteries.

Removing marks from a curved rail! A good rub with a damp cloth should remove most marks. For stubborn marks a light rub with wire wool or light gauge emery paper is all that is required. The rail should appear matt in colour not a shiny gloss colour.

Cleaning of your stair lift and rail should be undertaken by qualified engineers who should clean and lubricate the stairlift following the manufacturer's specification and guidelines on its annual service inspection.

Related Links


  Aucun commentaire | Ecrire un nouveau commentaire Posté le 02-02-2016 à 21h02

 pcb cutter and Source Custom Electronics or Embedded Systems Design from A Reliable Company for Best Quality Alerter l'administrateur Recommander à un ami Lien de l'article 

Source Custom Electronics or Embedded Systems Design from A Reliable Company for Best Quality If you are looking for the development and manufacturing of custom electronics or embedded systems design for your electronic software and hardware requirements, you can simply checkout for the services of Tronics Zone Company that has been in the industry for decades, offering reliable and effective solutions to its customers. The reliable company has rich experience in electronic product design, development, prototyping and also manufacturing if required according to the specifications of the customers. The company can design, electronic devices, according to the requirements of many industries, whether it is medical diagnostic instruments and analyzers, color LCD & touch screen solutions for both consumer & industrial needs, 3G/GSM & GPS remote monitoring & control systems, fingerprint biometric system and many more using latest technology to develop relevant microcontroller and microprocessors for the functionality of these equipment.

The company offers their custom electronics development services understanding the requirements of the customers and also involve not only in designing the product, but also prototyping and manufacturing if necessary using their state of the art facilities and expert team in completing the assignment. You can also approach the company for embedded systems design which is embedded with a microprocessor or microcontroller to perform different automated functions in electronic products like refrigerators, microwaves, washing machines, and also the television sets that can be controlled through the microprocessor or microcontrollers.

Moreover, http://chinapcb.exblog.jp/22679223/ it is also easy to change the function of the software in the embedded systems without the necessary of actually redesigning the hardware part of the system. Along with these products the company also extends their services in the designing and manufacturing of printed circuit board design, electronic product design, electronic manufacturing services, re-engineering services and also custom software development offering a huge cost advantage to the customers as the operating costs are lower in the country compared to any other electronic design and manufacturing companies across the world.

The company has their in house team who are highly qualified and experienced to handle both small and big projects with keeping the costs low and completing the job within anticipated time. The designing work is also simple using only minimum components necessary so that there is no compromise in quality and at the same time the profits are maximized due low production cost. The PCB layout designs are not outsourced securing the customer confidentiality and also manage all the component sourcing, inspection, board assembling, quality checks, functionality checks, manual and automated electrical tests all on the same platform to offer reliable services to the customers.

So just check out with the reliable company for any of your custom electronics or embedded systems design, hardware or software solutions that are of top quality offering 100% customer satisfaction.
Related Links

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 02-02-2016 à 19h56

 cheap pcb for Guide To PCB And PCB Swap Alerter l'administrateur Recommander à un ami Lien de l'article 

Guide To PCB And PCB Swap A PCB or a printed circuit board electrically connects the electronic devices using the conductive pads, tracks and some other features etched from the copper sheets, which are laminated onto the non-conductive substrate. These PCBs can be single layer, double layer or multi-layer also. Conductors on the different layers are in connection with the vias, the plated-through holes. Advanced PCBs contain the components like resistors, capacitors or some active devices embedded in the substrate.

Point to point construction and the wire wrap are considered as two major alternatives go PCBs. The additional design effort is required for PCB to lay out the circuit. But assembly and manufacturing of PCB can be automated. Actually, http://chinapcb.seesaa.net/article/431671635.html manufacturing the circuits using the PCBs is faster and cheaper, compared to the other wiring methods, which are in practice. In fact, the operator wiring errors can be eliminated using these boards too.

Frequently Asked Questions regarding PCB Swap

Q. What are the symptoms to detect damaged PCB?

A. Firstly, the damaged PCB will have the burnt marks. Secondly, http://pcbonline.blogieren.com/Erstes-Blog-b1/pcb-fabrication-process-Sri-Lankan-s-Team-Likely-Tour-To-Pakistan-b1-p139.htm the HDDs will stop spinning. Hence you will not be able to hear the spinning sound. In this case it is essential that you replace the Hard Drive PCB.

Q. Is it possible to repair HDD in case of PCB faults?

A. It is very much possible to repair hard drive PCB by swapping the PCB. But you must know that the PCBs are not universal. It means there is every chance that the new PCB will not adapt the old hard disk environment after the swapping. So it is essential that you know the required model or version of the PCB for your hard drive and purchase that only. You can check the manufacturers' website to check the compatibility of particular PCBs.

Q. Do hard drive faults indicate PCB faults only?

A. NO!!! Hard drive problems and faults can be occurred due to many reasons. PCB fault is obviously one of them. You shouldn't ever term a HDD problem as PCI fault. Hire the service of a qualified hardware engineer and let him check the hard disk condition. Only a qualified hardware engineer can tell you about the cause and nature of hard drive problem.

Q. From where should PCB be bought?

A. You can order a PCB online from the official website of the manufacturer. Otherwise there are some online peripheral stores, from where you can purchase your PCB device.

Related Links


  Aucun commentaire | Ecrire un nouveau commentaire Posté le 02-02-2016 à 18h09

 pcb fast - B.tech|M.tech Major|Minor Projects|Thesis|Dissertation Alerter l'administrateur Recommander à un ami Lien de l'article 

B.tech|M.tech Major|Minor Projects|Thesis|Dissertation Priganik Technologies Pvt. Ltd. is an ISO 9001-2008 certified and efficient Electronics Training & Development company, working towards the best http://www.kiwibox.com/pcbonline/blog/entry/134956847/pcb-connectors-get-the-best-printed-circuit-boards-at-rea/ career prospect of the growing engineers.

Priganik provides 3/6 Months 4/6 Weeks Project Based Industrial Training to All B.E/B.Tech students on self-support basis. We have tide- up with various Engineering colleges in the form of Project/Industrial/In-House Training to provide the high-end training and development program

PRIGANIK offers a wide spectrum of technical courses and application courses designed to suit every skill level, as well as the ability to consult directly with organizations to tailor made learning plans for any number of employees. Our products and services have a wide appeal and are applicable to those in varied positions including embedded design engineer, embedded developer, systems architects, test engineers, software developers, help desk staff, IT managers, senior executives, administrative assistants and business professionals.

PRIGANIK's leading IT-Education provider, equips learners with actionable knowledge, getting the right learning to the right people at the right time With PRIGANIK, you can accelerate and certify the skills of a globally dispersed staff with standardized course materials through every stage of the IT learning curve.

PRIGANIK's services:
PRIGANIK is into three major segments:
Project Based: - We provide project based training on various latest and upcoming technologies like Embedded System, Advance Embedded Systems (PIC, ARM, AVR), VLSI-Design & Verification, Robotics, VHDL, Verilog-HDL, Systems Verilog (HVL), Analog Circuit Designing(Spice Simulation), MSP430, PCB Designing, Ethical Hacking, Lab-View, MATLAB, Cyber Security, etc.
Corporate Training: - At PRIGANIK, we provide corporate education and custom-content training solutions to some of the India's largest private and public sector organizations. We serve our clients in various sectors such as Embedded Systems, VLSI-Design & Verification, information technology, education, professional services etc.

We have created embedded based products and web based solutions for many different types of businesses. Some examples of the embedded based products developed by us are Dhanbad Instruments pvt. ltd.
http://pcbonline.page.tl/pcb-prototype-machine-and-Plastics-Recycling-In-The-Mechanical-Engineering-Industry.htm />3.CONSULTANCY
PRIGANIK is a global consulting and technology services company specializing in industry-specific solutions, strategic outsourcing and integration services. Our consultancy and manpower supply services are an added advantage for our students.

PRIGANIK's Training packages:
PRIGANIK is specialized in imparting different types of training according to the needs of the Institute and students, namely:
Students undergo training on latest technologies at college campus (onsite) or at PRIGANIK Campus (offsite). Students are given real time exposure on LIVE Project that helps them gain in-depth knowledge of the technology.
Students in final year are worried about placement during 6-months training. Our Project Based Training Program is a process that starts with training based on live project and moves along the path of preparing the trainees for Interviews with the help of Industry Experts (Technical Interviews).
PRIGANIK also specializes in providing customized programs on various technologies, as per the requirement of the students/management or college.
The 6 Months Project Based Industrial Training is an exhaustive program on any of the chosen technology that equips the students with the in-depth knowledge of that technology with the hands on experience while working on the Live Projects. These programs are actually a golden opportunity for the students to learn some technologies which are not a part of their curriculum, which in turn catalyzes the smooth transition from college to workplace.
PRIGANIK specializes in providing training on various technologies namely:
*Embedded Systems
*Advance Embedded Systems (PIC, ARM, AVR)
*VLSI-Design & Verification
*Systems Verilog (HVL)
*Analog Circuit Designing (Spice Simulation)
*PCB Designing
*Ethical Hacking & Cyber Security

The training has following distinctive features:
* Qualified & Certified Industry Professionals as Trainers/Faculty
* Industry Collaboration & Awareness
* Technical Panel from Industry in Different Domains
* Upgraded Course Curriculum
* Live Projects
* Training Certificates and Project Letter
* State of Art Infrastructure with well-equipped labs
* One year membership card (for project and technical assistance)

In case of further queries, please feel free to contact us:

Priganik Technologies Pvt. Ltd.
#20, Rishi Colony, Gatta,
Tonk Road, Jaipur (Raj)-302015
0141-2708729, 9461982003 / 4 / 5, 8058697556, 9509042519
EMAIL: info@priganik.com
WEBSITE: www.priganik.com
Related Links

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 02-02-2016 à 17h36

 pcb making to The Important Phases of Customizing Electronic Design Alerter l'administrateur Recommander à un ami Lien de l'article 

The Important Phases of Customizing Electronic Design The engineers related to the field of electronics and communications sometimes get confused while designing a particular product because numerous advancing technologies are being introduced on daily basis. The use of these technical aspects has now increased due to the high demand of industries and corporations. They need an end to end solution for any requirement like robotics, embedded designs, circuit diagrams, micro controller projects, product design, analog design and much more. There are some phases through which the companies design these solutions with the help http://pcbonline.soclog.se/p/2015/12/?link=1451242008 of their technical experts.

Many firms carry out the expectations of clients by providing the services of Custom Electronic Design and produce improvement in which the client has to give an exact design of an electronic gadget which he wants to procure. The patrons who are not related to the field of electronics only have the fundamental idea of the gadget. They ask for the proposal from the manufactures while others give every technological specification of the appliance to be designed. The purchaser basically needs to provide all stipulation regarding the item for use; only then customization can be completed as per the prospect.

A micro controller (MCU) or microprocessor is fixed into the electronic devise by an embedded system. Our daily usage machines like geysers, microwave ovens, television, washing machines, computer and automobiles all have micro controllers rooted inside them. The operations performed by these rooted systems are controlled by some relevant software's. It offers an advantage that is, no loss of files and credentials and also the hardware could be redesigned effortlessly. Although these fixed systems are a part of our electronic device design but at times these are well thought-out to be a separate appliance.

The former phase of PCB design is prototyping. In this process of creating a Custom Electronic Design, the expertise engineers allow for the expansion of hardware in order to meet the specifications concerning the design outline. It is in fact concerned with the defining of a system or an application. The foremost purpose of prototyping is to gain a product that meets the accurate specifications and is quite effective as well as efficient. The product growth makes the PCB design ready for use. Soon after the product is legalized by taking measurements from the board and ensuring that it is meeting all the necessary specifications, it is handed over to the Development Experts.

Finally, after the completed development process of the product is finished up, it is ready to be delivered to the merchants. There are some firms that deal with this entire process of the customization and offer their vendors the accurate appliance, which has exactly the same specification as needed by the customer. You can search on the internet and check the status of the top class companies who are ready to offer you such services. You also have to keep an eye on the financial statements that each firm will display for you. Choose the firm which http://chinapcb.mihanblog.com/post/58 facilitates its appliance through the above mentioned phases.

For more information visit:-http://www.ronpcb.com/
Related Product

  Aucun commentaire | Ecrire un nouveau commentaire Posté le 02-02-2016 à 17h01

|<< | 1 |  2   3   4   5   6   7   8   9   10   11   12  >>> >>|

Fil RSS 2.0
Ajouter à NetVibes
Ajouter à Google
Ajouter à Yahoo
Ajouter à Bloglines
Ajouter à Technorati

Allzic en direct

Liens Commerciaux
L'information à Lyon
Retrouvez toute l'actu lyonnaise 24/24h 7/7j !

L'information à Annecy
Retrouvez toute l'actu d'Annecy 24/24h 7/7j !

L'information à Grenoble
Retrouvez toute l'actu de Grenoble 24/24h 7/7j !

Application Restaurant
Restaurateurs, demandez un devis pour votre application iPhone

Fete des Lumières
Fête des lumières : vente de luminaires, lampes, ampoules, etc.

Acheter un diffuseur d'huiles essentielles

Votre publicité ici ?
  Blog créé le 21-05-2015 à 11h03 | Mis à jour le 02-02-2016 à 21h02 | Note : Pas de note